Beli brake caliper tool di monotaro.id

Produk ini juga sering disebut dengan Kunci Ring Ratchet

It is a useful tool set for a caliper that also serves as a side brake, a European car that is difficult to return with a normal tool, etc. If various attachments are used, it corresponds also to ordinary single-push type piston calipers. Adapter is hard to remove by attaching a magnet to the tip part. It also comes with a 9.mm (3/8 inch) adapter so you can use it with ratchet etc.

For attaching and detaching o-rings, springs, etc. and for positioning small parts.

- Tampilan layar digital yang besar meminimalisir kesalahan membaca angka dan mempermudah pembacaan skala.- Terdapat fungsi zero adjustment yang dapat digunakan hanya dengan menekan tombolnya untuk mengatur jangka ke angka nol. Sangat memudahkan untuk membandingkan pengukuran.- Ada juga thumb roller yang memudahkan pengukuran.- Dapat mengukur diameter luar, diameter dalam, kedalaman, dan perbedaan langkah.

It is a tool to use when turning the piston of the rear brake caliper combined with the side brake. Main is used for rear disc brake. It is very convenient that each surface pattern can correspond to various shapes. It is possible to simply rotate the piston by fitting the protrusion coming out of the cube into the groove of the piston. When turning back the piston of the rear brake caliper with side brake combined type

TEKIRO KUNCI KONSTRUKSI / KUNCI RING DOUBLE RACHET / PERKAKASMaterial Chrome Molybdenum

- A dedicated tool for returning the disc caliper piston to replace the disc pad. -Disc brake piston tool (wide plate) ACB-12 and two special plates ATCB2A and ATCB2B used in combination with ACB-12 . -Compatible with opposed 4-, 6-piston and parallel 2-piston disc calipers. -It is a piston tool that can be used for vehicles such as ordinary cars (luxury passenger cars including LEXUS) and small trucks (ELF). *It cannot be used for the parking brake integrated brake caliper.

The Mitutoyo digital caliper delivers accurate, repeatable outside dimension, inside dimension, depth and step measurements with accuracy and unrestricted speed.

- A dedicated tool for pushing disc brake pistons (opposite 4-piston type). -Single-piston calipers, parallel-piston calipers, opposed-piston calipers, and opposed-piston 4-piston calipers from light cars to small trucks (2t class). *It cannot be used for the parking brake integrated brake caliper. *Since the opening of the opposed 2-piston brake caliper is smaller than the tool, it cannot be used while attached to the vehicle. (Can be used by removing the brake caliper from the vehicle)

-A dedicated tool that pushes back the brake caliper piston (single piston type) when replacing disc brake pads or overhauling. -The brake piston can be easily returned by simply gripping the lever. -Applies to single piston brakes from mini to medium-sized vehicles (2t class). *It cannot be used for the parking brake integrated brake caliper.